SHPB试验中粘弹性材料的应力均匀性分析

采用特征线解法，对满足ZWT方程的粘弹性材料在高应变率SHPB试验中的应力均匀性进行了数值研究。着重分析了不同的材料本构粘性(松弛时间)、瞬态波阻抗比和入射波升时对于试样中应力均匀性、应变均匀性和平均应变率等的影响。为今后动态试验的试样设计提供了一定的理论依据。     

岩石节理粗糙面的分形几何特性与剪切强度关系的实验研究

自然形成的岩石节理面的表面形状具有分形特性，利用分形理论来描述岩石节理的粗糙特性，并确立与岩石节理面的剪切力学特性间的关系对于指导岩体工程设计，和管理具有重要一研究利用开发设计的三维激光测距仪在精确测定岩石节理面的表面形状４ 基础上，依据变量图法建立了 岩石节理面的     

复杂梁动力问题的近似分析方法

本文介绍了在各种复杂条件下，分析梁振动特性的一个近似方法－模态摄动法。这一方法是在等截面均匀梁的模态子空间内实施，将复杂梁的变系数微分方程的求解转化为代数方程组的求解。通过算例，表明这一方法简单实用，且有良好的近似性。     

GLOBAL ATTRACTOR FOR HASEGAWA-MIMA EQUATION

The long time behavior of solution of the Hasegawa-Mima equation with dissipation term was considered. The global attractor problem of the Hasegawa-Mima equation with initial periodic boundary condition was studied. Applying the uniform a priori estimates method, the existence of global attractor of this problem was proved, and also the dimensions of the global attractor was estimated.     

Fractal Aperture Distribution of Activated Carbon Fiber and Adsorption Behavior to Low‐Density Benzene Steam

Based on the J(x) fractal distribution function of aperture given by Jaroniec, this article suggests another function K(x), a variant of J(x) but offering new insight. We then use these two functions to characterize three kinds of activated carbon fiber (ACF) of different specific areas. This article also provides the fractal distribution of the aperture and the isotherm of nonpolarity benzene steam on the ACF specimens and the relationship between them.     

SPECTRAL CHARACTERISTICS OF FREE AND LINKED PYRENE-TYPE CHROMOPHORES IN SOLUTION,POLYMER MATRICES,AND INTERPENETRATING NETWORKS

Monomers, 1-pyrenylmethyl methacrylate (PyMMA), 1-pyrenylbutyl methacrylate (PyBMA), 4-(1-pyrenyl)methoxymethyl styrene (PyMMS) and allyl-(1-pyrenylmehtyl) ether (PyMAE), with pyrene as chromophore, were prepared. Their spectral properties (absorption, emission and emission decay) in solution, and doped or bonded in polymer matrices and complex polymer systems as interpenetrating polymer networks (IPN), were investigated. Spectral properties of pyrene-containing monomers doped in polystyrene (PS), polymethylmethacrylate (PMMA), polyvinylchloride (PVC), polyethylene (PE) and grafted on PE as well as copolymerized in buthylmethacrylate-co-styrene copolymer (BMA-co-S) have been compared. Absorption and emission spectra of pyrene type probes in solution and in IPN matrices exhibit typical absorption of the pyrene moiety. For IPN with grafted probes on PE, the absorption is slightly shifted to red wavelength. For monomers, PyMMA, PyBMA and PyMAE grafted to PE, the shape of the emission spectrum depends on the wavelength of excitation. The ratio of intensity of the vibrational band, I₁/I₃, (I₁ peak at 377 nm and I₃ peak at 388 nm) has been a quite useful indicator of polarity of IPN. The relative quantum yields of fluorescence in IPN matrices are lower in comparison to polymer matrices of PE, PS, PMMA for all probes under study. The fluorescence life-times for bound and free probes have been in the range 100–200 ns, which is substiantialy shorter than for the parent pyrene chromophore under the same or similar condition. Grafted probes on PE alone, or as a part of IPN, exhibit substantially shorter life-time around 10 ns and decay is rather complex.     

准各向同性高电流密度导体弯曲特性研究

提出了一种准各向同性高工程电流密度高温超导导体的有限元模型,利用该有限元模型计算了导体在不同弯曲半径下的应变分布以及临界电流衰减程度,并对导体样品进行了弯曲实验。实验结果和仿真结果基本一致,基于该有限元模型进一步计算了导体的不同参数对弯曲半径的影响。该研究为准各向同性高工程电流密度高温超导导体在聚变磁体领域的应用提供了参考依据。     

EEG Fractal Analysis Reflects Brain Impairment after Stroke

Stroke is the commonest cause of disability. Novel treatments require an improved understanding of the underlying mechanisms of recovery. Fractal approaches have demonstrated that a single metric can describe the complexity of seemingly random fluctuations of physiological signals. We hypothesize that fractal algorithms applied to electroencephalographic (EEG) signals may track brain impairment after stroke. Sixteen stroke survivors were studied in the hyperacute (<48 h) and in the acute phase (∼1 week after stroke), and 35 stroke survivors during the early subacute phase (from 8 days to 32 days and after ∼2 months after stroke): We compared resting-state EEG fractal changes using fractal measures (i.e., Higuchi Index, Tortuosity) with 11 healthy controls. Both Higuchi index and Tortuosity values were significantly lower after a stroke throughout the acute and early subacute stage compared to healthy subjects, reflecting a brain activity which is significantly less complex. These indices may be promising metrics to track behavioral changes in the very early stage after stroke. Our findings might contribute to the neurorehabilitation quest in identifying reliable biomarkers for a better tailoring of rehabilitation pathways.     

Ultrasound freeze-thawing style pretreatment to improve the efficiency of the vacuum freeze-drying of okra (Abelmoschus esculentus (L.) Moench) and the quality characteristics of the dried product

Vacuum freeze-drying is a new and high technology on agricultural product dehydrating dry, but it faces the high cost problem caused by high energy consumption. This study investigated the effect of ultrasound (US), freeze-thawing (including the freeze-air thawing (AT), freeze-water thawing (WT), freeze-ultrasound thawing (UST), and freeze-air ultrasound thawing (AT + US)) pretreatments on the vacuum freeze-drying efficiency and the quality of dried okra. The results indicated that the application of ultrasound and different freeze-thawing pretreatments reduced the drying time by 25.0%–62.50% and the total energy consumption was 24.28%–62.35% less. The AT pretreatment reduced the time by of okra slices by 62.50% and the total energy consumption was 62.35% less. The significant decrease in drying time was due to a change in the microstructure caused by pretreatment. Besides, the okra pretreated with the US retained most of the quality characteristics (flavor, color, hardness, and frangibility) among all methods, while, AT + US had the most changeable characteristics in quality, which is deprecated in our study. The okra pretreated with the US and AT, separately, had the best dry matter content loss (9.008%, 5.602%), lower chlorophyll degradation (5.05%, 5.44% less), and higher contents of total phenolics, total flavonoids, and pectin, with strong antioxidant capacity, compared to other methods. The pretreatments did not have a large effect on the functional groups and the structure of pectin, but slightly affected the viscosity. It can be concluded that AT and US pretreatment methods are better than others.     

In-situ synchrotron X-ray imaging of ultrasound (US)-generated bubbles: Influence of US frequency on microbubble cavitation for membrane fouling remediation

Gaining an in-depth understanding of the characteristics and dynamics of ultrasound (US)--generated bubbles is crucial to effectively remediate membrane fouling. The goal of present study is to conduct in-situ visualization of US-generated microbubbles in water to examine the influence of US frequency on the dynamics of microbubbles. This study utilized synchrotron in-line phase contrast imaging (In-line PCI) available at the biomedical imaging and therapy (BMIT) beamlines at the Canadian Light Source (CLS) to enhance the contrast of liquid/air interfaces at different US frequencies of 20, 28 and 40 KHz at 60 Watts. A high-speed camera was used to capture 2,000 frames per second of the bubble cavitation generated in water under the ultrasound influence. Key parameters at the polychromatic beamlines were optimized to maximize the phase contrast of gas/liquid of the microbubbles with a minimum size of 5.5 µm. ImageJ software was used to analyze the bubble characteristics and their behavior under the US exposure including the microbubble number, size, and fraction of the total area occupied by the bubbles at each US frequency. Furthermore, the bubble characteristics over the US exposure time and at different distances from the transducer were studied. The qualitative and quantitative data analyses showed that the microbubble number or size did not change over time; however, it was observed that most bubbles were created at the middle of the frames and close to the US field. The number of bubbles created under the US exposure increased with the frequency from 20 kHz to 40 kHz (about 4.6 times). However, larger bubbles were generated at 20 kHz such that the average bubble radius at 20 kHz was about 6.8 times of that at 40 kHz. Microbubble movement/traveling through water was monitored, and it was observed that the bubble velocity increased as the frequency was increased from 20 kHz to 40 kHz. The small bubbles moved faster, and the majority of them traveled upward towards the US transducer location. The growth pattern (a correlation between the mean growth ratio and the exposure time) of bubbles at 20 kHz and 60 W was obtained by tracking the oscillation of 22 representative microbubbles over the 700 ms of imaging. The mean growth ratio model was also obtained.